A green skinned alien face, with a subtle purple iridescence, brown eyes and red and silver head piece.
I was unable to clearly capture the iridescence of this piece in the still shots, so I’ve embedded a video below so you can see it better.
Thickness: 17mm at the thickest point of the head, 6mm at the chin.
You will receive the exact item shown in the photos.
There is no varnish on this piece, making it suitable for being baked into larger polymer clay projects. If you would prefer a varnish on this one, I can do that for you, however, it will change the appearance somewhat. You can choose between satin finish and glossy finish. If you would like me to varnish it for you, please leave a message in notes to seller during checkout stating which finish you would prefer. Please keep in mind however, that adding a finish will add about 7 days processing time to you order, as the varnish will need time to cure.
This cabochon is suitable for making jewelry and other craft purposes. The back has been left untreated so that this cabochon may be used for polymer clay applications. If using this cabochon for something other than clay, you can paint the back of it with acrylic paint. For best results, sand the back of the cabochon with 320 or 400 grit sandpaper before painting, and allow paint to cure for several days before using. You can only use water based acrylic paints on polymer clay items. Other paints may damage the surface.
Alcohol, acetone and other chemicals should be kept away from all polymer clay items as these can damage the surface.
All orders will only ship to the address provided by the service you use to pay for your order. Please make sure you have entered the correct address at the time of purchase. Shipping addresses cannot be edited after purchase is complete. If using paypal, please make sure you enter the correct shipping address on the paypal checkout screen. Shipping addresses cannot be edited after you have submitted your order.